Mount-It! full motion articulating TV wall mount offers extreme versatility with a maximum extension of 18″ from the wall. This mount is ideal for installations where the TV needs to be swiveled significantly for various seating arrangements. Perfect for smaller flat screen TVs or for desktop computer flat screen monitors. This mount swivels and tilts, and fits flat against the wall or extends to 18 inches.

 Will the mount fit my TV?

1. Check the weight of your display, it should be less than 55 lbs. 2. Locate the four mounting holes on the back of the screen. If the bolt holes are  200x200mm/200×100/100×100/75×75 (8″x8″/8″x4″/4″x4″/3”x3”) apart from each other vertically and horizontally this bracket will fit. 3. Please check the area inside the 4 mounting holes to make sure there are not any plugs. Otherwise, the plate may block the plugs.

ValueMax brings you this Mount-It! wall mount at a great value. MI-407 provides you all you need, without the hefty price. Compare the price to any other similar articulating TV wall mount on Amazon.

Its articulating arm design is incredibly sturdy, and supports a wide range of LCD, LED flat screen TVs. Mount swivels from left to right for viewing from multiple angles. Continuous tilt motion is possible without the use of tools. Powder coated steel construction provides a sleek, high-tech look. Ideal for corner installations.

Features and Specs:

– TV Size Range: 19″ – 37″ (depending on VESA bolting pattern and the TV weight).

– Weight Limit: 55 lbs

– Collapses to 3.1″ low profile, Extends 18″ from the wall.

– Tilt, Swivel and Extend/Collapse function.

– Includes all necessary mounting hardware.

– Wall plate dimensions: 2.25” W, 7.5” H.

– Tilt: up to 12 degrees down. Swivel: 180 degrees to left or to right.

3 thoughts on “Mount-It! MI-407 LCD TV Wall Mount Bracket with Full Motion Swing Out Tilt and Swivel Articulating Arm for 19-37″ Flat Screen Displays with VESA 75 to 200, 55 lb Capacity WITH 17.5″ EXTENSION

Leave a Reply