The heavy duty steel mount is compatible with most LED, LCD, and Plasma TVs and other flat panel display between 37 and 75 inches weigh less than 165lbs. Supports all VESA mounting standards 684×300 600×400 600×300 600×200 500×300 400×400 400×300 400×200 300×300 300×200 200×200 200×100 and many odd size mounting patterns (mounting holes on the rear of the TV or panel should be no more than 28″ apart horizontally and up to 17.7″ vertically). Over 12 lbs. solid heavy-gauge steel construction offers a smooth surface, high-tech look while providing strength and durability. Viewing angle can be adjusted by tilt 0-15 degree forward. TV is positioned just 2.2″ profile from the wall for a clean, low-profile appearance. Lift and lock safety system secure the display in position as needed. How to ensure the mount compliance with your selected display? First, the weight of your display should be less than 165lbs. Second, mounting holes distance on the rear of TV must be less than 28″ (710mm) horizontally and 17.7″ (450mm) vertically. Last, the mount plate width is 30″. Your TV should be at least 30 inch wide. Otherwise, you will see the bracket.

2 thoughts on “VideoSecu Tilt LCD LED TV Wall Mount For Most 37-75″ LCD LED Plasma Television M80

  1. Mark says:

    Solid, affordable and easy to install HDTV wall mount I bought this wall mounting system based on the other person’s review. I’m glad that I did. UPS delivered this mount on the same day my new TV was getting delivered. With a little measuring, I had this installed in about an hour. It came with all of the hardware and fasteners that I needed. No missing pieces. No damage or scratches. It mounts to studs and it very strong. There are holes in the base plate to run wires through. They are in 2 different places so you can pick the location that fits your situation best. I was worried that this might be a 2-person job but I did everything by myself. I mounted a new 40″ Samsung. It fits securely and will not fall off the wall by mistake. I have had to remove the TV 3 times due to adding components and running new wires through the wall. Loosening the security screws on the TV rails allow you to take the TV off of the wall, do your business and hang it back up again in no time. Tighten the security screws once again and you’re…

Leave a Reply